Iron Railing Repair in Dallas–Fort Worth
Loose posts, rust at the base, wobble when you lean on it. A railing is the one piece of ironwork people put their weight on.
A loose railing is not a cosmetic problem
Nobody leans on a fence. Everybody leans on a railing. It is the one piece of ironwork on a property that carries a person’s weight, usually on stairs, usually held by somebody who needed the help.
Railings fail from the bottom. Where the post meets concrete or brick, water collects and sits. Rust forms inside the joint where you cannot see it, the post loses metal at exactly the point that carries the load, and the whole railing starts to move. By the time it wobbles, the damage has been going on for years.
We repair porch railings, stair railings, balcony railings and handrails. Same trade as the fences: cut out what has failed, weld in new metal, reset what has come loose, and finish it by hand so water stays out of the joint.
We cover the whole metroplex from the shop in Rockwall County.
What we see on railings
These are the problems that bring people to us, and all of them are repairable.
Loose posts
Posts that have worked free of concrete or brick are reset and anchored properly.
Rust at the base
The joint where the post meets the ground rots from the inside. Failed metal is cut out and new metal welded in.
Wobble and movement
Movement usually means a failed weld or a loose anchor, not a railing that needs replacing.
Cracked welds
Old joints crack where a railing takes daily use. They are ground back and rewelded.
Damaged sections
Bent or broken scrollwork and pickets are repaired, or new sections fabricated to match.
Flaking paint
Scraped back to sound metal and repainted by hand with oil-based Rust-Oleum and a rust inhibitor.
Repaired in place, matched to what is already there
Most railing work happens on site. Welding, resetting posts and painting are all done at your home, usually in a day. Where a section is beyond saving, we fabricate a replacement to match the existing pattern rather than fitting something off a shelf that does not line up. A railing repaired properly should not look repaired.
Repair or replace
Railings are almost always worth repairing. The ironwork on older homes in particular was made better than anything sold as a replacement today.
- A wobbling railing is usually a loose anchor or failed weld, not a dead railing.
- Rust at the base is repaired by cutting out the failed metal and welding in new.
- Most railing work is done in a day.
- Welds are guaranteed, and every completed job includes one free touch-up in the first year.
How a railing repair goes
You call
Tell us what it is doing. A photo of the base of the posts tells us most of what we need.
We come out
We check every post, anchor and weld, not only the one that moves.
Straight quote
Clear pricing, free estimate, no pressure.
The work
Failed metal cut out, new metal welded in, posts reset, then painted by hand.
Walkthrough
We go over it with you and you put your weight on it before we leave.
If it moves when you lean on it, call
A railing that moves is telling you something, and it does not fix itself. Iron restoration is the only trade we practise, and we work across the Dallas–Fort Worth metroplex.
Common questions about iron railing repair
Can a rusted iron railing be repaired?
Nearly always. What matters is whether there is sound metal to weld to, and usually there is. Rusted sections are cut out and new metal welded in, then the whole railing is finished by hand so water stays out of the joints.
My railing wobbles. Does it need replacing?
Usually not. Wobble almost always comes from a loose anchor at the base or a cracked weld, both of which are repairs. A railing that moves should be looked at quickly though, because it is carrying people.
Do you repair porch, stair and balcony railings?
Yes, all three, plus handrails. Same trade, same methods as our fence and gate work.
Can you match my existing railing if a section is missing?
Yes. We fabricate matching sections, including scrollwork and pickets, so a repair blends into the original rather than standing out.
How long does railing repair take?
Most railing jobs are done in a day. Larger runs or heavy fabrication can take longer, and we tell you before we start.
Is the work done at my home?
Yes, in almost every case. Welding, resetting and painting all happen on site. Only custom fabrication is done in the shop.
What paint do you use on railings?
Oil-based Rust-Oleum with a rust inhibitor, painted on by hand. Hand painting works the finish into the joints and pitted metal, which is where rust starts again if it is missed.
Do you guarantee railing work?
Welds are guaranteed, and every completed job includes one free touch-up within the first year.
Why does the bottom of my railing rust first?
Because water sits where the post meets concrete or brick, and it works into the joint where you cannot see it. That is also where the load is carried, which is why base rust matters more than surface rust further up.
What areas do you cover?
The whole Dallas–Fort Worth metroplex, including Rockwall, Heath, Rowlett, Dallas, Lucas, Frisco, McKinney, Plano, Allen, Wylie and Fort Worth.
Is rod iron fence repair the same as wrought iron fence repair?
Yes. Rod iron and rot iron are how most people say wrought iron, and we answer to all three. Whatever it is called, the fence rusts in the same places and is repaired the same way.